unisonic technologies co., ltd mgbr10l50 preliminary diode www.unisonic.com.tw 1 of 3 copyright ? 2014 unisonic technologies co., ltd qw-r601-215.c mos gated barrier rectifier ? description the utc mgbr10l50 is a surface mount mos gated barrier rectifier, it uses utc?s advanced technology to provide customers with low forward voltage drop and high current capability, etc. the utc mgbr10l50 suitable for free wheeling, high frequency inverters, polarity prot ection, and low voltage. ? features * low forward voltage drop * high current capability * high surge capability * high efficiency ? symbol to-220-2 to-277 ? ordering information ordering number package pin assignment packing lead free halogen free 1 2 3 MGBR10L50L-TA2-T mgbr10l50g-ta2-t to-220-2 a k - tube mgbr10l50l-t27-r mgbr10l50g-t27-r to-277 a k a tape reel note: pin assignment: a: anode, k: cathode ? marking information package marking to-220-2 to-277
mgbr10l50 preliminary diode unisonic technologies co., ltd 2 of 3 www.unisonic.com.tw qw-r601-215.c ? absolute maximum ratings (t a =25c unless otherwise specified) single phase, half wave, 60hz, resistive or inductive load. for capacitance load, derate current by 20%. parameter symbol ratings unit dc blocking voltage (note 1) v rm 50 v working peak reverse voltage v rwm 50 v peak repetitive reverse voltage v rrm 50 v rms reverse voltage v r ( rms ) 35 v average rectified output current t c =125c i o 10 a non-repetitive peak forward surge current 8.3ms single half sine-wave superimposed on rated load i fsm 150 a repetitive peak avalanche power (1 s, 25c) p arm 5000 w operating junction temperature t j -65~+150 c storage temperature t stg -65~+150 c note: absolute maximum ratings are those values be yond which the device could be permanently damaged. absolute maximum ratings are stress ratings only and functional device oper ation is not implied. ? thermal characteristics parameter symbol ratings unit junction to ambient to-220-2 ja 60 c/w to-277 73 (note 3) junction to case to-220-2 jc 2.5 c/w to-277 13 (note 3) ? electrical characteristics (t a =25c unless otherwise specified.) parameter symbol test conditions min typ max unit reverse breakdown voltage (note 1) v ( br ) r i r =0.50ma 50 v forward voltage drop v fm i f =10a, t c =25c 0.60 v i f =10a, t c =125c 0.55 v peak reverse current at rated dc blocking voltage (note 1) i rm v r =50v, t c =25c 300 a v r =50v, t c =125c 25 ma notes: 1. short duration pulse test used to minimize self-heating effect. 2. thermal resistance junction to case mounted on heatsink. 3. mounted on an fr4 pcb, single-sided c opper, with 100cm2 copper pad area.
mgbr10l50 preliminary diode unisonic technologies co., ltd 3 of 3 www.unisonic.com.tw qw-r601-215.c utc assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all utc products described or contained herein. utc products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. the information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice.
|
